Radon

• How Minnesota’s average radon level compares to the U.S. levels and differences in radon levels between Minnesota counties.

• Seasonal variations in average radon levels.

• The number and percent of properties tested for radon, by county and census tracts.

• The 95th percentile, median, geometric average, and arithmetic average radon levels in pCi/L, by county.

• The number and percent of properties tested for radon, by county, that had one or more tests ≥ 2 pCi/L and ≥ 4 pCi/L.

  • Threshold of ≥ 2 pCi/L was selected because the EPA recommends considering mitigation if a home tests at ≥ 2 pCi/L.

  • Threshold of ≥ 4 pCi/L was selected because the EPA highly encourages mitigation if a home tests at ≥ 4 pCi/L.

• The MDH Indoor Air Unit, other state programs, policy makers, public health organizations, local public health, and researchers can use these data to inform their planning, outreach, research and evaluation.

• The general public can use this information to better understand radon in Minnesota.

• These data and maps can be used to:

  • Inform which Minnesota counties should be targeted for increased radon awareness and testing efforts.

  • Evaluate radon testing rates and program outcomes.

  • Educate the public about the health effects from radon exposure.

• What the radon level is in your home. Each home is unique and can have very different test results than even your neighbor’s home. The only way to know your radon risk is to test your home for radon.

• The exact radon levels found in all types of Minnesota buildings. MDH received radon test data from eleven radon labs, this does not include all of the radon tests conducted in Minnesota.

• Demographics of those who use and submitted the radon test kits.

• The radon test addresses were cleaned by MDH Indoor Air Unit then geocoded to identify a latitude/longitude and to assign each test to the intersecting county.

• For mapping the census tracts, those geocoded to the city level or higher-level geography were excluded.

Annual Number of Properties Tested in MN

• Tests were selected based on the test start date.

• Post-mitigation tests were excluded.

• Test results were sorted by latitude and longitude to identify multiple tests at one property. One test was counted per latitude/longitude per year.

Average Annual Number & Rate of Properties Tested (per 10,000 housing units)

• Post-mitigation tests were excluded.

• Test results were sorted by latitude and longitude to identify multiple tests at one property. One test was counted per latitude/longitude per year.

• The number of buildings tested for radon per census tracts.

• The rate of buildings tested was calculated by dividing the number of radon tests over the number of total housing units for that census tract and then divided by the number of years. Rates were scaled to 'tests per 10,000 housing units' to help interpretation of small tests counts.

95th Percentile Radon Test

• All post-mitigation values and multiple tests were retained because any elevated test is of concern.

• The 95th percentile was identified for each county and census tract.

• Number & Percent of Buildings Tested at (≥2 and ≥4)

• Post-mitigation values were retained.

• The maximum test value for each latitude/longitude was selected then maximum tests that were ≥ 2 pCi/L were flagged. The number of tests ≥2 pCi/L by county was calculated. The same process to identify count and percent above ≥4 pCi/L.

• The number of tests, with multiple tests for same latitude/longitude removed, was the denominator.

Average (geometric, arithmetic) Radon Test

• Post-mitigation tests were excluded.

• For geometric average, the arithmetic mean of the logarithm-transformed values of the radon tests by latitude/longitude, then by county, were calculated and then transformed to the original scale using exponentiation. Geometric mean is typically used for data that has a skewed distribution (often environmental data is skewed).

• For arithmetic average by county, first the arithmetic average by latitude/longitude was calculated, then the arithmetic average by county was calculated. EPA uses arithemtic mean when reporting national radon estimates data. Same method for census tracts.

Median Radon Test Value

• Post-mitigation tests were excluded.

• For median, the arithmetic mean test per latitude/longitude was calculated then the median was determined by county and census tract.

Lower limit of detection, or LOD, is the lowest quantity of a substance that can be distinguished from the absence of that substance (a blank value) within a stated confidence limit (generally 1%). A common strategy for representing test values below the LOD is replacement with (LOD/√2). This method was applied to this analysis.

Lab	LOD
Air Chek Inc.	0.3 pCi/L
AccuStar Labs	0.4 pCi/L
Alpha Energy Las Inc.	0.6 pCi/L
Pro-lab Inc.	0.2 pCi/L
Radalink Inc.	0.14 pCi/L
RTCA	0.1 pCi/L
Olmsted County	0.2 pCi/L
EMSL	0.3 pCi/L

• If the purpose of the indicator was to get a count of the number of properties that tested for radon, then only one test was counted for each latitude/longitude.

• If the purpose of the indicator was to calculate a statistic (mean, median, 95th percentile) then the tests were averaged at the latitude/longitude level before the statistic was calculated at the county level.

• If the purpose of the indicator was to get the count and percent of properties tested ≥2 and ≥4 then the maximum value per latitude/longitude was selected.

• To the best of our abilities, this data only includes multi-family and single-family homes. While we try to exclude commercial buildings in the radon test data, tests may not indicate whether they are commercial or residential.

• The testing assumes that users (primarily property owners) followed the instructions for test kit deployment.

• These data include most tests from both private laboratories and from licensed radon measurement proffesionals, including tests conducted using a continuous radon monitor.

• These data my be incomplete; we are unaware if there are unreported laboratories.

• Results for each individual apartment unit are excluded (one value is used to represent each building, whether a single family home or multi-family). The large majority of tests are from single family homes.

To learn more about radon, visit MDH Indoor Air Unit.

For more information about the radon data and measures, contact the MN Data Access Portal.